RTPS80-XX-02 Series COTS Power Supply

Three 80W Models:
- 5V @ 16A
- 12V @ 6.7A
- 24V @ 3.3A
Two input cord options (NEMA 15-5P or AS/NZS 4417)
Output voltage options of 18V & +48V are available (contact factory for more information)
Designed to meet Meet FCC Part 15 Class B, CISPR22.2 Class A, Mil-Std-461F compliant
Rugged metal enclosure with potting offers improved shock and vibration performance and resistance to environmental factors
Universal input 100~240V +/- 10%
Convection cooled
Compact size
UL Listed 60950-1

DB15 Connector

Waterproof/Dustproof to IP52

IEC60320 C16 Connector

Input Characteristics
Voltage and Frequency	90 ~ 264Vac, 47 ~ 63Hz
AC Current	1A Max. at any Input voltage range at Max. load condition
Inrush Current (Typ.)	less than 40A at 120V ~ 240V input (Optional low inrush model: less than 15A at 110V input and less than 30A at 220V input
Leakage Current	<0.75mA/240Vac @60Hz

Output Characteristics	Part #: RTPS 80-05-02	Part #: RTPS 80-12-02	Part #:RTPS 80-24-02
Output Voltage	5V	12V	24V
Current (A) Minimum	0A	0A	0A
Current (A) Maximum	16A	6.7A	3.3A
Voltage Initial Setting	+/- 1%	+/- 1%	+/- 1%
Combined Load/line Regulation	Output maximum full rated o/p, CURRENT regulation +/-5%
Ripple and Noise	The ripple and noise is as follows when measured with a maximum bandwidth of 20MHz and 4.7uF/50V capacitor connected at output wire shall be less that 1% P-P
Efficiency	81% minimum at 120~240Vac at maximum load
Hold Up Time	8mS minimum

Protection Specifications
Over Current	Output limited less than 120% max rated output current
Short Circuit	Output shall shut down and automatic restart
Over Voltage	Power supply shall not exceed 115% ~130% of rated output voltage
Over Temperature	Power supply shall reduce the output voltage and current at the out of spec high temperature condition and maintain the hot spot temperature below components rating

Environment Specifications
Operating Temperature	Nominal -40 to +60°C ambient at full load Linearly de-rate output power to 70% up to 80°C
Operating Humidity	5% to 95%, non-condensing
Cooling Requirement	Natural air convection cooling
Storage Temp., Humidity	-40 ~ +85°C 10 ~95% R.H
Altitude	15,000 ft minimum operation and -500ft to 40,000 ft storage
Vibration	Frequency 5 to 50 Hz, acceleration ±7.35 M/(S*S), direction X,Y and Z Axis

Safety And EMC
Safety Standards	Complies with the applicable UL, CSA, CE and IEC safety requirements, including GS differences. Official qualification for each, including CB scheme and UL 60950-1 listed.
EMI Conduction & Radiation	Meets FCC Part 15 Subpart A and B Class B, ICES-003, CISPR-32, CISPR-24, EN 55032, EN 61000-3-2, EN 61000-3-3 With EMI filter meets MIL-STD-461F, FIXED WING EXTERNAL AND HELICOPTERS CE102,RE102,CS101,CS114,CS115,CS116,RS103
Reliability	Mean Time Between Failure (MTBF) >100,000 hours, MIL-HDBK217E at 40 degrees C ambient.
EMS Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A
Isolation	1500VAC minimum from AC input to DC output 1500VAC minimum from AC input to Chassis Ground 500VAC minimum from DC output to Chassis Ground
Burn-In	48 hours at 100% rated load prior to final testing
MTBF	200K hrs minimum at 25C, convection cooled, per part calculation method
Warranty	3 Years

Mechanical Specifications
Physical Construction	Rugged metal enclosure with potting offers improved shock and vibration performance and resistance to environmental factors
Dimensions	5.91(L) X 3.94(W) X 1.61(H) INCH
AC Input	IEC60320 C14 type power entry connector that meets IP52 minimum.
DC Output Cable	36” +/-2″, with D-Sub 15 pin connector

Request a Quote